Gas Furnace & Boiler Repair

RESIDENTIAL SERVICESWe Provide Professional Furnace Repair Throughout the Kenosha Area

Whether you have a Bryant or Carrier furnace, or a Lennox, Trane, Rheem, Ruud, Goodman or any other brand of furnace, our Nate Certified technicians can solve all your furnace problems.

Servicing all heating system brands, makes, and models!Why should you choose to call Wisconsin Fuel and Heating to repair your furnace?

Experience. Since 1923 Wisconsin Fuel and Heating has repaired tens of thousands of furnaces in southeastern Wisconsin. You won’t find anyone in the area with more experience in repairing furnaces than us. And by taking care of customers like you, we have earned numerous industry awards!

Thoroughly stocked service vehicles. Our trucks are stocked with parts to solve most heating problems on the spot without making lengthy trips back to our warehouse or to supply houses which means we will get you back to feeling comfortable in no time.

100% Satisfaction Guarantee. Wisconsin Fuel fully guarantees our work for your complete satisfaction. We not only want you to be happy with the services we provide, but also with our employees that work so hard to make it happen.

Here are also a few things you can check out on your own if you choose.

Gas Furnace/Boiler – No Heat

Check the settings on your thermostat. Make sure the temperature control selector is set above room temperature, and the system switch is on the HEAT or AUTO position. The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the furnace is operating.
Try to get the furnace to turn on by raising the thermostat to its highest temperature setting.
If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
Make sure all the registers are open and not obstructed.
Check the power disconnect switch by the furnace.
Check the fuse/breaker at the electrical panel for the furnace.
Check to make sure the gas control valve to the furnace is open.
Check the pilot light. (Newer electronic ignition furnaces will not have a pilot light).
If the problem persists, please give us a call!

Heat Pump – No Heat

Check the settings on your thermostat. Make sure the temperature control selector is set above room temperature, and the system switch is on the HEAT or AUTO position. The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the air conditioner is operating.
Try to get the heat pump to turn on by raising the thermostat to its highest temperature setting.
If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
Make sure all the registers are open and not obstructed.
Check the power disconnect switch by both units (outdoor and indoor).
Check the fuse/breaker at the electrical panel for both the outdoor and indoor units.
If the problem persists, please give us a call!

Oil Furnace/Boiler – No Heat

Check the settings on your thermostat. Make sure the temperature control selector is set above room temperature, and the system switch is on the HEAT or AUTO position. The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the air conditioner is operating.
Try to get the oil furnace to turn on by raising the thermostat to its highest temperature setting.
If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
Make sure all the registers are open and not obstructed.
Check the power disconnect switch by the furnace.
Check the fuse/breaker at the electrical panel for the furnace.
Check to make sure you have oil in the tank.
Press the reset control ONE time. The unit may sound like it turns on, but if it shuts off after a minute or two it may have sprayed oil which did not ignite – DO NOT PUSH THE RESET AGAIN! Please give us a call.
If the problem persists, please give us a call!